WIRELESS SHOCK SENSOR

• Dimensions (H x L x W): 1" x 3.13" x 1.61" (25.5mm x 79.5mm x 41mm)
• Mounting Hardware: Included
• Tamper Protected: Yes
• Frequency: 2.4 GHz
• Power Requirements: 1 x 3V Lithium battery (Qty 1; Panasonic CR123A, Huiderui CR123A, Duracell DL123A)
• Encryption: 128-bit AES
• Coverage Area: 10-12 ft. diameter (5-6 ft. radius)
• Operating Temperature: 32° to 122°F (0° to 50°C)
• Relative Humidity: 95%, non-condensing
• Agency Approvals: FCC/IC, cETL Listed, Conforms to UL 634, Certified to ULC/ORD-C634
• Other Standards: RoHS, Product must be tested at least once each year

It is recommended that the PROSIXSHOCK sensor is installed with several options;

• Loop 1: Normally closed, built-in reed switch, used with the included magnet
• Loop 2: Externally wired, closed-circuit contact loop connected to the Terminal Block (unsupervised). The wiring limit is 3 ft.
• Loop 3: Built-in shock sensor. Red LED flashes briefly upon sensing shock